loading

Door Lock Installation Costs & Extra Fees

When you get a door lock installed, extra charges beyond the basic labor fee can pop up depending on the type of door and the existing cutouts on your current lock. In this guide, we'll cover what causes these extra fees on-site and what you need to watch out for if you decide to do it yourself.

What's the Difference Between the Door Lock Price and the Installation Cost?

If you buy your new lock online and then hire someone to install it, you'll be charged separately for the service call and the installation labor. Generally, the base installation fee runs between 30,000 and 50,000 won. If you need someone to come out on a weekend or during the evening, expect an extra surcharge of 10,000 to 20,000 won. A lot of people just look at the lowest price online, only to have the final bill balloon after extra on-site modifications are needed.

Depending on what the site looks like, the technician might need to add reinforcement plates or perform custom machining on the mortise. This can add 10,000 to 30,000 won in materials. It's especially important to tell them the exact type of door you have—like a glass door or a sash door, not just a fire-rated door—because those require special brackets. If you buy the lock directly from an authorized dealer, you might be able to take advantage of a package deal that waives or discounts the installation fee.

Item Ordering Online & Hiring Service Buying & Installing Through a Dealer Emergency Weekend/Night Service
Service Call & Basic Installation Fee 30,000 to 50,000 won Free or Included 50,000 to 80,000 won
Additional Materials (Reinforcement Plates, etc.) 10,000 to 30,000 won 0 to 15,000 won 10,000 to 30,000 won
Extra Machining Fees Charged separately based on site conditions Charged separately based on site conditions Charged separately based on site conditions

Common Mistakes When Installing a Door Lock

The most frequent issue people run into when trying a DIY installation is drilling holes in the wrong spot, which leaves unnecessary marks on your door. Since the shaft connecting the inner main body and the outer front body varies by manufacturer, you often can't reuse the original mounting holes. Also, if you overtighten the screws, you risk bending the circuit board, causing the keypad to malfunction or the motor to spin uselessly.

When installing batteries, mixing alkaline batteries with manganese or rechargeable ones can cause leakage, damaging the main board. Another common mistake is finishing the lock replacement and leaving immediately without testing it while the door is closed, leading to you getting locked out. You must test the lock—checking if the key, passcode, and key card are recognized—at least ten times while the door is open.

Checking Door Lock Installation Compatibility by Housing Type

For apartment or townhouse fire doors, most models are standardized, so you can usually install almost any product without a hitch. However, older single-family homes with wooden doors or metal frames can be tricky because the doors are thin or have wide gaps, making it hard to secure standard mortise-style locks designed for multi-unit buildings. In these situations, you should opt for products specifically made for glass doors or use a hook-style latch to effectively block anyone trying to pry the door open.

If you are a renter, remember you are responsible for restoring the entryway to its original condition when you move out, so keep your original door hardware or auxiliary locks safe. If you plan to switch to a main lock type that requires new drilling, you must discuss it with your landlord beforehand to avoid disputes when you get your security deposit back. Be careful with major brand built-in options, like the GateMan Door Lock; removing them without permission could be considered a breach of your lease.

Standard Steps for Installing a Door Lock

  1. Open the interior cover of the existing lock and carefully remove the batteries and mounting screws one by one to take it apart.
  2. Measure the diameter and spacing of the holes left in the door and confirm they match the specifications of the new product you bought.
  3. Insert the mortise on the side of the front door, secure it tightly with bolts, and then connect the front body and main body using the cable.
  4. Insert the batteries, complete the administrator password and user registration, and then test the locking mechanism while leaving the door open.

Frequently Asked Questions About Door Lock Installation

Can I install a new lock using the existing holes?

If you are replacing it with a model from the same manufacturer and in the same style, you can usually reuse the original drill holes, which makes the job easier. However, if you are switching from a main lock type to an auxiliary lock type, or if you change manufacturers entirely, you might end up with exposed holes or need to drill extra holes.

Why does it keep beeping even when the door isn't locked?

This usually happens when the door isn't fully closed, or when the strike plate and the deadbolt aren't lining up perfectly, causing the sensor to malfunction. Most of the time, you can fix this by adjusting the door frame or tightening the hinge screws to ensure the door closes properly.

What should I do if there is absolutely no power?

First, check that the batteries are inserted with the correct polarity, and also check if there has been any leakage if the lock was left unused for a long time. You can temporarily get power by placing a 9V square battery on the emergency power supply terminal and then enter the passcode to open the door.

Door lock installation is more than just putting hardware together; since it's directly related to your security, you need to finish the job thoroughly to make sure there are no mechanical issues.