Avoid Common Mistakes When Installing GP-700D Lock
If you're looking to buy or replace your front door lock and you've set your sights on the GP-700D, you're not alone. However, when it comes time to install it or prepare everything yourself, you might run into issues like the lock not fitting your door type or getting confused about how to use the auto-key.
In this post, we're going to break down the common mistakes people make when choosing and installing the GP-700D door lock. We'll explain the reasons behind these errors and how to avoid them. We'll also cover frequently asked questions, like the cost of the auto-key or what to do if the battery dies.
Before You Install Your GP-700D Door Lock, Check Your Door Type
The most common mistake is ordering the product just by looking at the specifications. Door locks vary depending on the thickness of your door, the location of the mounting holes, and whether it opens in a certain direction. Even if they are from the same brand family, the suitability for installation can change based on your specific environment.
- First, measure the thickness of your current door and note the location of the existing holes.
- Determine whether your door swings inward or outward (left-opening or right-opening).
- Figure out if it's a fire-rated door or a standard entrance door. Keep in mind that apartment fire doors might have specific replacement guidelines set by community regulations.
For Push-Pull Locks, Your Handling Habits Matter
The GP-700D uses a push-pull mechanism, meaning you pull the handle from the outside and push it from the inside to open. If the family members who use it aren't used to it, they might get confused about the correct sequence for pulling the handle, leading them to think the door won't open.
Specifically, if you pull the handle right after entering the code, the lock might not have fully disengaged yet, resulting in no response. Make it a habit to wait a moment after the keypad responds before applying pressure to the handle.
What to Check When Searching for Dasadoor Locks
When you search using the term "Dasadoor Lock," you might see products from several different manufacturers. Before you place an order, it's smart to double-check that the product model number, GP-700D, is listed correctly, and confirm the installation details and warranty period.
How to Use Auto Keys and What to Do When the Battery Dies
Auto keys allow you to unlock your door using a card or a physical key instead of your PIN or fingerprint. If your product has an auto key feature, you must follow the registration process exactly, as any key not properly registered won't work.
- Look for the card key registration menu in the user manual. Availability can vary depending on the model.
- Once you're in registration mode, hold the card or key close to the designated spot.
- After registration is complete, test it by actually opening the door to make sure it works.
Sometimes, if the battery runs out, the lock won't open with your PIN or fingerprint. Most door locks have an external power terminal that allows you to temporarily supply power. It’s a good idea to check the emergency power section in your manual ahead of time. If you're unsure how to proceed, don't try to force it, as you could damage internal components; in that case, call a professional.
What Determines the Price of Auto Keys?
The cost of an auto key varies based on the overall product package, the type of auto key (card type, physical key, remote type, etc.), and the installation method. Since the final cost depends on whether you need to buy it separately or if it comes included with the main unit, you should check the full configuration with the seller.
Frequently Asked Questions
How Much Do Auto Keys Cost?
The price changes depending on the product configuration, the seller, and the specific type of auto key. First, check whether it’s included with the main unit or if you need to purchase it separately, and then compare prices.
What Should I Do If the Auto Key Battery Dies?
If the battery dies, follow the emergency power instructions provided in the user manual, or keep an alternative unlocking method handy that isn't the auto key. It’s best not to try and take the lock apart yourself.
Can I Install the GP-700D Myself?
Since installation might require door modifications or wiring inside, if you don't have installation experience, we recommend hiring a professional. Also, be sure to check the specific management standards, especially if it's a fire-rated door.
The very first thing you should do right now is measure the thickness of your door and note whether it opens inward or outward. Having that information will help you confirm the product configuration and installation requirements, which can significantly reduce the chance of ordering the wrong thing.